*
Number guessing game
Report
Shared:2021-01-01
Last updated:2021-01-02
7
2343
Introduction:
(You should build the Knob Robot plus the LED module before you start). (Updated with LED).
Instructions:
Turn the potentiometer randomly(clockwise or counterclockwise) then press the on-board(on mcore) button to check. If it is over the number, it shows >n and the LED turns Red on LED 1. If it is under the number, it shows <n and the LED turns Red on LED 3. But if it is correct, it shows a checkmark and all LED's turn green.